Introduction
If you’re a proud owner of a Whirlpool dryer, it’s essential to know about its parts and their functions. Your dryer may stop working correctly, and you might need to replace some parts to get it up and running again. In this article, we’ll provide you with a complete list of Whirlpool dryer parts and their descriptions.
1. Heating Element
The heating element is a crucial part of the dryer that warms up the air before it enters the drum. It is located at the back of the dryer, and if it fails, the dryer won’t produce heat. The heating element can be replaced if it is damaged or broken.
2. Drum Belt
The drum belt is a long, thin belt that wraps around the drum, motor, and pulley. It helps the drum rotate smoothly and evenly. If the drum belt breaks or becomes worn, it can cause the drum to stop rotating. You can replace the drum belt by removing the top and front panels of the dryer.
3. Idler Pulley
The idler pulley is a small wheel that helps the drum belt rotate smoothly. It is located near the motor and helps to keep the belt tensioned correctly. If the idler pulley becomes worn or damaged, it can cause the belt to slip, which will result in a noisy dryer.
4. Drum Rollers
The drum rollers are small wheels that support the drum as it rotates. They are located at the back of the dryer and can become worn over time. If the drum rollers become damaged or worn, they can cause the drum to wobble, which will result in a noisy dryer. You can replace the drum rollers by removing the rear panel of the dryer.
5. Thermal Fuse
The thermal fuse is a safety device that prevents the dryer from overheating. It is located on the blower housing and will cut off power to the dryer if the temperature becomes too high. If the thermal fuse blows, the dryer won’t start. You can replace the thermal fuse by removing the back panel of the dryer.
6. High-Limit Thermostat
The high-limit thermostat is another safety device that prevents the dryer from overheating. It is located on the heating element housing and will cut off power to the dryer if the temperature becomes too high. If the high-limit thermostat fails, the dryer won’t produce heat. You can replace the high-limit thermostat by removing the back panel of the dryer.
7. Cycling Thermostat
The cycling thermostat is a temperature control device that regulates the temperature inside the dryer. It is located on the blower housing and will cycle the dryer on and off to maintain the correct temperature. If the cycling thermostat fails, the dryer may not produce enough heat. You can replace the cycling thermostat by removing the back panel of the dryer.
8. Timer
The timer controls the length of time that the dryer runs. It is located on the control panel and can become worn over time. If the timer fails, the dryer won’t start or stop at the correct time. You can replace the timer by removing the control panel of the dryer.
9. Control Board
The control board is the brain of the dryer and controls all of its functions. It is located in the control panel and can become damaged if there is a power surge or other electrical problem. If the control board fails, the dryer won’t start or function correctly. You can replace the control board by removing the control panel of the dryer.
10. Door Switch
The door switch is a safety device that prevents the dryer from starting if the door is open. It is located on the dryer’s front panel and can become worn or damaged over time. If the door switch fails, the dryer won’t start. You can replace the door switch by removing the front panel of the dryer.
Conclusion
Whirlpool dryers are reliable and long-lasting appliances. However, like any machine, they may require repairs or replacement of parts over time. By understanding the various parts of your Whirlpool dryer and their functions, you can ensure that your dryer runs smoothly and efficiently for years to come. We hope that this list of Whirlpool dryer parts and their descriptions has been helpful to you.