Introduction
We’ve all been there – you’re ready to moisturize your skin, but the lotion pump won’t budge. It can be frustrating, especially when you’re in a hurry. But don’t worry, we’ve got you covered. In this article, we’ll give you some tips on how to fix a lotion pump that won’t open.
Step 1: Check the Lid
The first thing you should do is check the lid of the lotion bottle. Make sure that it’s twisted on tightly, but not too tight. If it’s too tight, the pump won’t be able to push down and release the lotion. If it’s not tight enough, the lotion may leak out or dry up.
Step 2: Clean the Pump
If the lid is on properly and the pump still won’t open, you may need to clean it. Sometimes, lotion residue can build up in the pump and prevent it from working. To clean the pump, remove the lid and use warm, soapy water to rinse it out. You can also use a toothbrush or cotton swab to clean the small crevices.
Step 3: Try a Different Angle
If cleaning the pump didn’t work, try pressing down on the pump at a different angle. Sometimes, the pump can get stuck in a certain position and won’t release the lotion. By pressing down on it from a different angle, you may be able to loosen it up and get it working again.
Step 4: Use a Pin
If all else fails, you can try using a pin to unclog the pump. Carefully insert the pin into the opening of the pump and move it around to dislodge any lotion residue. Be gentle, as you don’t want to damage the pump or make the problem worse.
Conclusion
In conclusion, a lotion pump that won’t open can be frustrating, but it’s not the end of the world. By following these tips, you should be able to get your lotion pump working again in no time. Remember to check the lid, clean the pump, try a different angle, and use a pin if necessary. Your skin will thank you for it!