Introduction
If you’re experiencing problems with your GE dryer, such as it not spinning or making a loud noise, it’s possible that the belt has worn out and needs to be replaced. The good news is that you can easily replace the belt yourself with the help of a video tutorial. In this article, we’ll provide tips and tricks on how to replace the GE dryer belt by watching a video.
Step 1: Find the Right Video Tutorial
The first step in replacing the GE dryer belt is to find a reliable video tutorial. There are plenty of tutorials available on YouTube, but not all of them are created equal. Look for a tutorial that is specific to your model of GE dryer, and that has good reviews from other viewers. You want to make sure that the tutorial is clear and easy to follow.
Step 2: Gather Your Tools
Before you start the replacement process, you’ll need to gather the necessary tools. You’ll need a screwdriver, a putty knife, and of course, the replacement belt. You can purchase a replacement belt from a hardware store or online. Make sure you have the correct size and type of belt for your GE dryer model.
Step 3: Disconnect the Dryer
The next step is to disconnect the dryer from the power source. This is important for your safety. Unplug the dryer from the wall and turn off the gas if your dryer is connected to a gas line. You should also disconnect the dryer vent hose from the back of the dryer.
Step 4: Remove the Top and Front Panels
Using a putty knife, release the two clips holding the top panel in place. Lift the top panel up and prop it against the wall. Then, remove the two screws holding the front panel in place. Lift the front panel up and disconnect the door switch wiring harness.
Step 5: Remove the Drum
With the front panel removed, you can now remove the drum. Reach under the drum and release the belt from the tensioner pulley. Then, lift the drum out of the dryer and set it aside.
Step 6: Replace the Belt
With the drum removed, you can now replace the old belt with the new one. Wrap the new belt around the drum, with the grooved side facing the drum. Then, thread the belt through the idler pulley and around the motor pulley.
Step 7: Reassemble the Dryer
With the new belt in place, you can now start to reassemble the dryer. Replace the drum and thread the belt back around the tensioner pulley. Then, replace the front panel and the top panel. Reconnect the door switch wiring harness and the vent hose.
Step 8: Test the Dryer
With the dryer reassembled, it’s time to test it out. Plug the dryer back in and turn on the power. Start the dryer and listen for any unusual noises. If everything sounds normal, then you’ve successfully replaced the GE dryer belt!
Conclusion
Replacing the GE dryer belt is a simple process that can be done with the help of a video tutorial. By following the steps outlined in this article, you can replace the belt yourself and save money on a repairman. Remember to always prioritize safety when working with electrical appliances, and to choose a reliable tutorial that is specific to your model of GE dryer.