Introduction
If you’re an AKM owner, you know the importance of having a reliable and sturdy side folding stock. However, with frequent use, your stock can become dull and damaged. That’s why it’s essential to learn how to polish your AKM side folding stock. In this article, we will guide you through the process step-by-step, so you can have a shiny and smooth stock.
Materials Needed
Before you start polishing your side folding stock, make sure you have the following materials: – Sandpaper (220 grit and 400 grit) – Metal polish (such as Flitz or Blue Magic) – Microfiber cloth – Rubbing alcohol – Protective gloves
Step-by-Step Guide
Step 1: Disassemble Your AKM
Before you start polishing your side folding stock, make sure to disassemble your AKM completely. This includes removing the stock from the receiver, so you can polish it more effectively.
Step 2: Sanding
Using 220 grit sandpaper, start sanding the entire surface of the stock. Make sure to focus on any scratches or dents that may be on the surface. After sanding, switch to 400 grit sandpaper to smooth out the surface.
Step 3: Cleaning
After sanding, clean the surface thoroughly with rubbing alcohol. This will remove any dirt or debris that may have accumulated during the sanding process.
Step 4: Polishing
Apply a small amount of metal polish onto a clean microfiber cloth. Start polishing the surface of the stock in a circular motion, applying firm pressure. Continue until you see a shiny and smooth surface.
Step 5: Finishing
After polishing, clean the surface once again with rubbing alcohol to remove any remaining polish residue. Then, reassemble your AKM and enjoy your newly polished side folding stock!
Tips and Tricks
– Wear protective gloves to avoid getting metal polish on your hands. – Use a toothbrush to clean hard-to-reach areas. – Don’t apply too much pressure while sanding or polishing, as this can damage the surface of the stock. – Apply metal polish in small amounts to avoid over-application.
Conclusion
Polishing your AKM side folding stock is an easy and straightforward process that can make a huge difference in the appearance of your rifle. By following these simple steps, you can have a shiny and smooth stock that will last for years to come. Remember to take your time and be patient, and your efforts will be rewarded with a stunning finish.