Introduction
If you have a Maytag dryer and need to replace the cord, it’s important to know how to correctly wire a 3-prong cord. This article will guide you through the process step-by-step, so you can safely and easily install your new dryer cord.
What You Will Need
Before starting, make sure you have the following tools and materials: – A 3-prong dryer cord – Wire strippers – Screwdriver – Needle-nose pliers – Electrical tape
Step-by-Step Guide
Step 1: Unplug the Dryer
Before starting any electrical work, always unplug the appliance from the outlet. This will ensure your safety while working on the dryer.
Step 2: Remove the Old Cord
Using a screwdriver, remove the screws on the back of the dryer that hold the old cord in place. Carefully remove the old cord and set it aside.
Step 3: Prepare the Wires
Using wire strippers, remove about one inch of insulation from each of the three wires on the new cord. You should see a black, white, and green wire.
Step 4: Connect the Wires
Using needle-nose pliers, connect the black wire to the left terminal, the white wire to the middle terminal, and the green wire to the right terminal. Tighten the screws to secure the wires in place.
Step 5: Wrap with Electrical Tape
Wrap each wire connection with electrical tape to ensure they don’t come loose over time.
Step 6: Reattach the Cover
Replace the cover on the back of the dryer and tighten the screws.
Step 7: Plug in the Dryer
Plug the dryer back into the outlet and test it to ensure it’s working properly.
Conclusion
In conclusion, wiring a 3-prong Maytag dryer cord is a simple process that can be done in just a few easy steps. By following this guide, you can ensure your dryer is wired correctly and safely. As always, if you’re unsure about any part of the process, it’s best to consult a professional electrician.