Introduction
Toilet water running but not filling can be an annoying problem that could cause water wastage and higher utility bills. The issue could be caused by various factors, such as a broken flapper, faulty fill valve, or a problem with the water supply. Fortunately, fixing the issue is not complicated, and you can save money by doing it yourself. In this article, we will provide you with tips to help you fix a running toilet in 2023.
Identify the Cause of the Problem
Before you start fixing a running toilet, it is essential to identify the cause of the problem. The cause could be a broken flapper valve, which is located at the bottom of the tank. When the flapper valve is broken, water will continuously leak from the tank into the bowl, causing the toilet to run constantly. Another cause could be a faulty fill valve, which regulates the water flow into the tank. If the fill valve is not working properly, the tank will not fill up, and the toilet will continue to run.
Turn off the Water Supply
Once you have identified the cause of the problem, you will need to turn off the water supply to the toilet. The water supply valve is usually located behind the toilet or on the wall behind the toilet. Turn the valve clockwise to shut off the water supply.
Fix a Broken Flapper Valve
If the flapper valve is causing the problem, you will need to replace it. Remove the old flapper valve by disconnecting it from the chain that connects it to the flush handle. Take the old flapper valve to a hardware store to get an exact replacement.
Fix a Faulty Fill Valve
If the fill valve is causing the problem, you will need to fix or replace it. Start by removing the tank lid and flushing the toilet. Observe the fill valve and check if it is working correctly. If the valve is not working, you will need to replace it. Turn off the water supply to the toilet and remove the old fill valve. Install the new fill valve and turn on the water supply.
Check the Water Supply
If the flapper valve and fill valve are working correctly, but the toilet is still running, there could be a problem with the water supply. Check if the water supply valve is fully open. If the valve is open and the toilet is still running, there could be a problem with the water pressure. Call a plumber to check the water pressure.
Test the Toilet
After fixing the problem, turn on the water supply and test the toilet. Flush the toilet and observe if the tank is filling up correctly. If the tank is filling up correctly and the toilet is not running, the problem is fixed.
Conclusion
Fixing a toilet that is running but not filling is not complicated, and you can do it yourself. The problem could be caused by a broken flapper valve, faulty fill valve, or a problem with the water supply. Identify the cause of the problem and follow the steps above to fix it. Remember to test the toilet after fixing the problem to ensure that it is working correctly.