Introduction
Are you facing the problem of your Whirlpool Cabrio dryer not starting up despite having power? It can be frustrating, especially if you have a pile of laundry waiting to be dried. However, there can be several reasons why your dryer won’t start. In this article, we will discuss some common troubleshooting tips to help you fix this issue.
Check the Power Supply
The first thing you should do is check the power supply to your dryer. Make sure that it is properly plugged in and that the cord is not damaged. Also, check the circuit breaker to ensure that it hasn’t tripped. If it has tripped, reset it and try starting the dryer again.
Inspect the Door Switch
If the power supply is fine, the next thing you should check is the door switch. The door switch is a safety feature that prevents the dryer from starting if the door is open. Make sure that the door is properly closed and that the switch is working correctly.
Examine the Thermal Fuse
Another common reason for a dryer not starting is a blown thermal fuse. The thermal fuse is a safety device that prevents the dryer from overheating. If it blows, the dryer won’t start. You can check the thermal fuse with a multimeter to see if it has continuity. If not, it needs to be replaced.
Inspect the Start Switch
The start switch is responsible for sending power to the motor to start the dryer. If it is faulty, the dryer won’t start. You can check the start switch with a multimeter to see if it is working correctly. If it is not, it needs to be replaced.
Examine the Drive Motor
If the start switch is working correctly, the next thing you should check is the drive motor. The drive motor is responsible for turning the drum. If it is faulty, the dryer won’t start. You can check the drive motor with a multimeter to see if it is working correctly. If it is not, it needs to be replaced.
Inspect the Belt
The belt is responsible for turning the drum. If it is broken or worn out, the dryer won’t start. You can check the belt by opening the dryer and looking at it. If it is broken or worn out, it needs to be replaced.
Examine the Idler Pulley
The idler pulley is responsible for keeping tension on the belt. If it is faulty, the belt may slip or break, causing the dryer not to start. You can check the idler pulley by opening the dryer and looking at it. If it is faulty, it needs to be replaced.
Inspect the Timer
The timer is responsible for controlling the duration of the drying cycle. If it is faulty, the dryer may not start. You can check the timer with a multimeter to see if it is working correctly. If it is not, it needs to be replaced.
Check the Control Board
The control board is responsible for sending power to the various components of the dryer. If it is faulty, the dryer may not start. You can check the control board with a multimeter to see if it is working correctly. If it is not, it needs to be replaced.
Conclusion
In conclusion, a Whirlpool Cabrio dryer not starting can be frustrating, but there can be several reasons for it. By following the above troubleshooting tips, you can identify and fix the issue. If you are unable to fix the problem, it is best to seek the help of a professional technician.