Amana Dryer Belt Ned4655Ew1: A Comprehensive Guide

Best Amana Dryer Belt Diagram How To Avoid A Costly Repair


If you own an Amana dryer model NED4655EW1, you may at some point need to replace the dryer belt. The dryer belt is the component responsible for turning the drum of the dryer. Over time, due to wear and tear, the dryer belt may break, causing the drum to stop turning. In this article, we will provide you with a comprehensive guide on how to replace the Amana dryer belt NED4655EW1.

Step-by-Step Guide

Replacing the Amana dryer belt NED4655EW1 may seem like a daunting task, but it is actually quite simple. Here is a step-by-step guide:

Step 1: Unplug the dryer

The first step is to unplug the dryer from the electrical outlet. This is to ensure your safety while working on the dryer.

Step 2: Remove the front panel

Next, you need to remove the front panel of the dryer. To do this, remove the screws that hold the front panel in place using a screwdriver. Once the screws are removed, lift the front panel and pull it towards you to remove it.

Step 3: Remove the drum

With the front panel removed, you can now access the drum. Lift the drum slightly and pull it towards you to remove it from the dryer.

Step 4: Replace the belt

With the drum removed, you can now access the dryer belt. Remove the old belt by lifting it off the motor and pulley. Install the new belt by looping it over the motor and pulley.

Step 5: Reassemble the dryer

Once the new belt is in place, reassemble the dryer by following the steps in reverse order. Start by placing the drum back into the dryer and reattaching the front panel with the screws.

Tips for Replacing the Amana Dryer Belt NED4655EW1

Here are some tips to keep in mind while replacing the Amana dryer belt NED4655EW1: – Make sure to purchase the correct replacement belt for your dryer model. – Refer to the dryer manual for specific instructions on how to replace the belt. – Use caution when working on the dryer and ensure that it is unplugged before beginning any repairs. – Take a picture of the belt before removing it to ensure that you install the new belt correctly. – Inspect other components, such as the pulley and rollers, while the dryer is disassembled to ensure that they are in good condition.


Replacing the Amana dryer belt NED4655EW1 is a simple task that can be done by anyone with basic DIY skills. By following the steps outlined in this article and keeping the tips in mind, you can successfully replace the dryer belt and have your dryer up and running in no time. Remember to always prioritize safety when working on any electrical appliance.