If you own a Kenmore 110 dryer, it’s likely that you’ll need to replace the belt at some point. A broken or worn-out belt can prevent your dryer from functioning properly, leading to frustration and inconvenience. In this article, we’ll provide you with a step-by-step guide on how to replace the belt on your Kenmore 110 dryer.
Tools and Materials You’ll Need
Before you start the process of replacing the belt on your Kenmore 110 dryer, you’ll need to gather a few tools and materials. Here’s what you’ll need: – A replacement belt – A screwdriver – A putty knife – A pair of pliers – A vacuum cleaner
Now that you have everything you need, let’s get started on the process of replacing the belt on your Kenmore 110 dryer.
Step 1: Unplug Your Dryer
Before you start working on your dryer, make sure it’s unplugged from the electrical outlet. This will prevent any accidents from happening while you work on the machine.
Step 2: Remove the Lint Trap
To access the belt, you’ll need to remove the lint trap from the top of the dryer. Use your fingers or a putty knife to gently pry it loose.
Step 3: Remove the Screws
Next, use your screwdriver to remove the screws that hold the top of the dryer in place. There should be two screws at the back of the dryer and two at the front.
Step 4: Lift the Top of the Dryer
Once you’ve removed the screws, lift the top of the dryer up and back. You may need to use a bit of force to get it to release.
Step 5: Remove the Front Panel
With the top of the dryer out of the way, you’ll need to remove the front panel. To do this, use your screwdriver to remove the screws that hold it in place. There should be two screws at the top and two at the bottom.
Step 6: Disconnect the Door Switch
Before you can completely remove the front panel, you’ll need to disconnect the door switch. Use your pliers to gently pull the wires apart.
Step 7: Remove the Drum
With the front panel out of the way, you’ll be able to access the drum. Use your vacuum cleaner to remove any lint or debris from inside the dryer. Then, use your hands to lift the drum out of the dryer.
Step 8: Replace the Belt
Now that you have access to the motor and pulley, you’ll be able to replace the belt. Remove the old belt and replace it with the new one, making sure it’s properly aligned with the pulley.
Step 9: Reassemble the Dryer
Once you’ve replaced the belt, it’s time to put everything back together. Follow the steps in reverse order, reattaching the drum, front panel, top of the dryer, and lint trap.
Step 10: Test Your Dryer
Finally, plug your dryer back in and test it out to make sure it’s working properly. If everything is functioning as it should, you’re good to go!
Replacing the belt on your Kenmore 110 dryer may seem like a daunting task, but with the right tools and a bit of patience, it’s a task that can easily be accomplished. By following the steps outlined in this article, you’ll be able to replace your dryer’s belt and get your machine running smoothly once again.